Digital Body Fat Analyzer,Handheld Body Fat Tester,Body Composition Analyzer for Personal Health Portable Multi-Function…

Specification:
Item Type: Handheld Body Fat Tester
Material: ABS
Size: Approx. 24 x 16 x 4cm / 9.45 x 6.3 x 1.57in
Battery Type: 2 x AAA battery (Not Included)

How To Use:
1. After loading the battery or pressing POWER, the LCD will display in full screen, and the buzzer beep and enter the setting state of guest number. 
2. Press SET to enter height – weight – age – gender settings; Setting process according to ▲/▼ can be adjusted to the desired setting, guest number, age each increase or decrease 1 unit, height increase or decrease 0.5cm, weight increase or decrease 0.2kg, gender between men and women conversion; Continue to hold ▲/▼ 2 seconds can enter the fast adjustment state. 
3. After data setting, press START, and hold the handle with both hands to measure the corresponding fat percentage, basal metabolic value and BMI value. 
4. The test results can be divided into Emaciated, Standard, Conceal Corpulent, Muscle Corpulent and Corpulent by visual measurement to show body fat rate and body type.
5. In the measurement results, E1 may be caused by too dry hands in the test, E2 is caused by not holding hands well, E3 is beyond the range tested by the body fat machine. 
6. If the test is stopped for more than 2 minutes, the system will automatically shut down. Press POWER to start again. 
7. Value range of human data 
Height Range: 100-199.5cm / 39.37-78.54in
Weight Range: 10-199.8kg / 22.05-440.48lb
Age Range: 10-99 Years Old 
Number of Groups: 1-9 Groups  

Package List:
1 x Handheld Body Fat Tester
1 x Manual

【Fat Measuring Device】This fat analyzer is an electronic body fat monitor with 3 inch LCD graphic display powered by 2xAA batteries.And there are only 5 bottons on it ,it’s easy to control it.
【Easy To Use】You just need to hold the device, and to input your height, weight, age, and gender, then the device will measure and calculate your BMI, then display your body figures in its LCD.Show basal metabolism that the number of calories necessary to maintain life.
【Working Principle】Uses the human resistance impedance body and the corresponding body parameters (height, weight, age, gender) to measure the body fat rate.
【Display Basal Metabolism】It can display basal metabolism, that is, the number of calories needed to maintain life, body fat percentage and BMI. Basal metabolism changes with age, gender, and body type. Combined with the calories consumed by daily exercise, it is possible to understand the approximate consumption. Pay attention to the balance of calorie intake and total calorie consumption. So you can get their data anytime at home without going to a doctor or a fitness trainer.
【Best Measurement Suggestion】The reading is highest in the few hours after getting up in the morning, because the water content in the human body will be lost after a long night of sleep. To be accurate, please try to measure body fat percentage at night; if you measure it at different time periods in the same day, the readings may be different, but as long as it is measured at the same time and under the same conditions every day, the percentage of body fat percentage is accurate.