Ketone Breath Analyzer with Upgraded Semi-Conductor Sensor -White

Important to Get Accurate Ketones Readings!

The monitor needs to be exhausted before your first use since it may have residuals from production to warehouse; if you want to test another person consequently after your testing, please also kindly exhaust your previous residuals.

To do this, turn on the Keto Breath Meter, wait for the 15 seconds countdown finish, and turn off. Repeat the same procedure 1-2 times (without blowing) before you proceed to your first test. During testing, please blow for 5 seconds immediately once “START” showing then ketone meter will start analyzing your breath, the readings will be visible 10 seconds.

Cautions Before Measurement:

Please test your ketone levels under the same conditions each time right after waking up in the morning before consuming anything in fasting status!

Using Steps:

1.Powered by 2x AAA alkaline batteries (not included)

2.Press the power button for 3 seconds to start device

3.Warm-up and exhaust residuals

4.Blow for 5-6 seconds right after warm-up

5.Ketone meter analyzes and reading shows

6.No more painful finger pricks or messy urine strips

Breath Acetone Concentration Readings Instructions (PPM):

 0 ~ 1.9 PPM:  You are not in ketosis or just right before ketosis.

2.0 ~ 3.9 PPM: You are at very early stage of ketosis.

4.0 ~ 9.9 PPM: You are in a light status of ketosis. The body fat is burning at a low pace.

10 ~ 39 PPM: You are in the optimum level of ketosis. This is the stable fat burning zone, the process of fat being used by the body as the main source of energy.

40 ~ 59 PPM: Be Caution! You are approaching too much ketosis level. Adjust your level to under 40ppm.

60 ~ 99 PPM: Danger! You are in too high level of ketosis. Ketoacidosis.

Cautions before measurement: Be cautious about factors that may affect your results because the device is with high sensitivity sensor and avoid brushing your teeth, smoking, drinking or eating foods 30minutes before taking the test for accurate results. In order to accurately analyze and track your testing readings, we strongly recommend testing your ketone levels under the same conditions each time right after waking up in the morning before consuming anything in fasting status!
Breath ketone meter detects your breath acetone from 0 to 99 PPM and follow 6 level guidance: 0.0-1.9ppm (No ketosis), 2.0-3.9ppm (Early Stage Ketosis), 4.0-9.9ppm (Light Ketosis), 10-39ppm (Stable Fat Burning Zone), 40-59ppm (Caution-High Ketosis), 60-99ppm (Ketoacidosis); Tracking breath acetone is a better measure of what your body is actually using for fuel because acetone in our breath is an actual byproduct of fat burning, and 80% of fat that we burn leaves the body through the lungs
The ketone monitor needs to be exhausted before your first use. To do this, turn on the Keto Breath Meter, wait for the 15 seconds countdown to be completed, and turn it off. Repeat the same procedure 1-2 times (without blowing) before you proceed to your first test. During testing, please blow for 5-6 seconds immediately once “START” showing then Ketone Breath analyzer will start analyzing your breath, the result readings will be visible for 10 seconds
This ketone Breath meter is an easy-using and self-monitoring device for individuals following on a keto life. Breath ketosis meter saves you from finger pricks, and the device can be used repeatedly by replacing the mouthpiece, which saves your money for testing from continiously buying strips, also more convenient because you only need to breathe with the monitor for 5 seconds
Kind reminder: please do not compare the testing readings with the the traditional meter because of different analyzing methods, our ketone breath analyzer is tracking the breath acetone which is a better measure of what your body is actually using for fuel because acetone in our breath is an actual byproduct of fat burning